Vinosart® PS Cartridge 0.65 µm 20"

Vinosart® PS 0.45 μm | 0.65 μm are pleated membrane filter cartridges with a single layer asymmetrical polyethersulfone membrane inside. Vinosart® PS has been especially designed for the filtration of wine and sparkling wine.

Price (USD):
$427.00
Item No.: 
5422805A2
Availability: 
Piece
1

*Custom/bulk order quotes are provided within 72 hours of request.

Product Information

Vinosart® PS 0.45 μm | 0.65 μm are pleated membrane filter cartridges with a single layer asymmetrical polyethersulfone membrane inside. Vinosart® PS has been especially designed for the filtration of wine and sparkling wine. Vinosart® PS offers a very high flow rate and total throughput combined with an excellent chemical regeneration capability.

Application

Vinosart® PS is used for the final filtration prior bottling of wine and sparkling wine.

Flow rate | Total throughput

The polyether sulfone membrane has a special asymmetrical pore structure that ideally matches the requirements for the wine and champagne filtration in terms of flow rate and total throughput.

Microbiological retention

Both filters guarantee absolut retention of wine spoiling yeasts and provide highest microbiological safety for the bottling process of wine and champagne.

Chemical compatability

Vinosart® PS filter cartridges are extremely resistant to all conventional chemical regenerating agents and processes, right across the entire pH spectrum from 1 to 14.

Integrity testable

The integrity of Vinosart® PS filter cartridges can be tested daily using the Sartocheck® Mini. Integrity test parameters see technical data.

Quality

Every filter element of Vinosart® PS is integrity tested during production to guarantee highest level of security.

Accessories Information

  • Adapter
    28 (S-adapter top, locking 3-flange bayonet adapter with double O-ring bottom)

Applications

  • Application
    Beverage Filtration
  • Application Area
    Filtration of near-water beverages
  • Industry
    Pharma / Biotech / F&B

Dimensions

  • Filter Size
    20"(1.56 m² / 16.79 ft²)
  • Filtration Area
    1.56 m² | 16.79 ft²

General Specifications

  • Capsule/Cartridge Format
    Cartridges
  • Filter Format
    Cartridges
  • Maximum Allowable Back Pressure
    2 bar | 29 psi at 20°C

Materials of Construction

  • Filter Material
    Polyethersulfone (PES)
  • Housing Material
    Polypropylene (PP)
  • Material o-ring | seal
    Silicone (SI)
  • Membrane Material
    Polyethersulfone (PES), asymmetric
  • Structural Compounds
    Polypropylene (PP)
  • Support Fleece
    Polypropylene (PP)

Operating Conditions

  • Maximum Differential Pressure
    20 °C: 5 bar, 80 °C: 2 bar, 121 °C: 0.5 bar

Physicochemical Information

  • Gamma Stable
    No
  • Pore Size
    0.65 µm

Product Information

  • Brand
    Vinosart® PS
  • Pack Size
    1
  • Type
    Sterile filter

Sterility/Purity

  • Delivery Condition
    Non-Sterile
  • Sterilization Method
    • Autoclavable & In-Line Steam Sterilizable
    • Hot Water & In-Line Steam Sterilizable

Usage Protocols

  • Sterilization Procedures
    • Autoclaving of wet filter cartridges up to a maximum temperature of 134 °C, for 30 minutes
    • In-line steam sterilization of wetted cartridges with a maximum of 2.3 bar | 34 psi inlet pressure and 2 bar | 29 psi outlet pressure (max. ∆p = 0.3 bar | 5 psi)
    • Hot water sterilization at 85–95°C, 30 minutes, ΔP max 0.5 bar