Sartopure® PP3 T-Style Maxicaps® 8 µm 10"

Tech Support Documents
Sartopure® PP3 T-Style Maxicaps® 8 µm 10" Sartopure® PP3 T-Style Maxicaps® 8 µm 10"
 

The Sartopure® filter family is optimized for the clarification and retention by utilizing multiple layers of progressively finer pleated polypropylene or adsorptive glass fleece material. The turbidity reduction results in optimal protection of all downstream material like chromatographic columns or membrane filters.

Item No.: 
5058301P1--SO
Piece
1

*Custom/bulk order quotes are provided within 72 hours of request.

Choose your Sartopure® PP3

See more products

The Sartopure® PP3 prefilter platform is the result of decades of experience in prefiltration in pharmaceutical and biopharmaceutical processes. This development has led to a polypropylene fleece-based prefilter offering both,highest total throughput and protective abilities. Its outstanding filtration ability results in a significant reduction of the required filtration area, essentially reducing filter consumption and the overall cost of prefiltration. Sartopure® PP3 is the ideal choice for particle retention and protection of downstream equipment for all product contact applications.

Datasheet

Sartopure® PP3 — Particle Reduction Filter Elements
en 845.5 kB

Applications

  • Application
    Clarification  
  • Industry
    Pharma / Biotech  

Compliance Information

  • Bacterial Endotoxins
    < 0.25 EU/mL as determined by the LAL test  
  • Biological Reactivity
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).  

Connections (Physical)

  • Connector Inlet
    1.5" Tri-clamp 50 mm  
  • Connector Outlet
    1/2" Single Stepped Hose Barb  

Dimensions

  • Filter Size
    10"(0.65 m² / 7.0 ft²)  
  • Filtration Area
    0.65 m²  
  • Outer Diameter
    170 mm (110.4 mm without Connection / Valves)  

General Specifications

  • Capsule/Cartridge Format
    T-Style Maxicaps®  
  • Maximum Allowable Back Pressure
    2 bar (29 psi) at 20°C  

Materials of Construction

  • Housing Material
    Polypropylene (PP)  
  • Material o-ring | seal
    Silicone (SI)  
  • Support Fleece
    Polypropylene (PP)  

Operating Conditions

  • Maximum Differential Pressure
    5 bar  

Physicochemical Information

  • Non-Fiber Releasing
    This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.  
  • Retention Rate
    8.0 µm  

Product Information

  • Brand
    Sartopure® PP3  
  • Pack Size
    1  

Sterility/Purity

  • Sterilization Method
    Autoclavable  

Usage Protocols

  • Sterilization Procedures
    Autoclaving: at 134°C, 30 min, 2 bar  
  • Maxicaps® Filter Holders
    Maxicaps® Filter Holders
    Item no.
    M_MaxiCaps_Filter_Holders

    The Sartorius Stedim Biotech Maxicaps® holder has been specially designed to integrate Maxicaps® into biopharmaceutical processes.

  • Sartoguard
    Sartoguard
    Item no.
    M_Sartoguard

    All members of the Sartoguard family utilize a highly asymmetric polyether sulfone (PES) membrane double layer for unmatched protection of final filters and bioburden reduction with an LRV of 6 per cm². In addition, combinations with different depth filter materials and gamma sterilizable versions are available.