Sartoguard GF | Midicaps® | 0.2µm | Size 8 | 4pc.

Tech Support Documents
Sartoguard GF | Midicaps® | 0.2µm | Size 8 | 4pc. Sartoguard GF | Midicaps® | 0.2µm | Size 8 | 4pc. Sartoguard GF | Midicaps® | 0.2µm | Size 8 | 4pc.
 

  • Effective Filtration Area: 0.08 m² | 0.9 ft²
  • Pore Size: 0.8 µm prefilter | 0.2 µm final filter
  • Membrane Material: Polyethersulfone
  • Fleece Material: Glass Fiber
  • Connectors: Inlet: Sanitary 1 ½“| Outlet: Hose Barb ½“ single stepped
  • Sterilization: Delivered non-sterile | Autoclavable

________________________________________

Connector explanation:

O = Hose Barb ½“ | S = Sanitary 1 ½“ | F = Sanitary ¾“

Size explanation:

Size 8 = 0.08 m² | Size 9 = 0.15 m² | Size 0 = 0.3 m²

Filter Size
Sterilization Method
Item No.: 
5485307G8--SO--A
Availability: 
Pieces
4

*Custom/bulk order quotes are provided within 72 hours of request.

Choose your Sartoguard

See more products

Applications:

  • Protection of downstream equipment and final membrane filters
  • Bioburden reduction

Benefits:

  • More economical process flow
  • Downsizing of filtration systems
  • Significantly higher total throughput performance
  • LRV of 6 per cm² filtration area for Brevundimonas Diminuta and for Serratia Marcescens

Pure PES membrane

Sartoguard PES

For all, basic membrane prefiltration steps to protect your final membrane filter and downstream equipment. The single-use variants are also available as gamma sterilizable versions.

Power of glass fleece

Sartoguard GF

The Sartoguard GF filter elements combining the defined retention performance of membrane filters with high adsorptive power of glass fiber fleeces.

Unique PES Nanofleece

Sartoguard NF

The Sartoguard NF is the only gamma sterilizable membrane depth filter combination in single-use applications utilizing unique PES Nanofleece technology. The Nanofleece protects the membrane double layer from early blockage due to a high particle load.

For highest process flexibility all Sartoguard® filters are available as for conventional stainless steel or single use applications. All filter elements are available in various sizes and adapter combinations.

Applications

  • Application
    • mAB Production
    • Protection of Final Filters
  • Industry
    Pharma / Biotech
  • Modality
    • Media Filtration
    • Harvest | Cell Removal
    • Filtration after Virus Inactivation

Compliance Information

  • Biological Reactivity
    All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
  • Extractables
    The total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".

Connections (Physical)

  • Connector Inlet
    1.5" Tri-clamp 50 mm
  • Connector Outlet
    1/2" Single Stepped Hose Barb

Dimensions

  • Filter Size
    size 8 (0.08 m² / 0.85 ft²)
  • Filtration Area
    0.08 m²
  • Outer Diameter
    108.5 mm (77 mm without Connection / Valves)

General Specifications

  • Capsule/Cartridge Format
    Midicaps®
  • Filter Format
    Capsules
  • Maximum Diffusion
    7 mL/min at 2.0 bar | 29 psi
  • Minimum Required Bubble Point
    2.3 bar | 33 psi
  • Test Pressure
    2 bar

Materials of Construction

  • Housing Material
    Polypropylene (PP)
  • Material o-ring | seal
    Silicone (SI)
  • Membrane Material
    Polyethersulfone (PES)
  • Support Fleece
    Glass Fiber (GF)

Operating Conditions

  • Maximum Differential Pressure
    5 bar

Physicochemical Information

  • Pore Size Final-filter
    0.2 µm
  • Pore Size Pre-filter
    0.8 µm

Product Information

  • Brand
    Sartoguard GF
  • Pack Size
    4

Sterility/Purity

  • Delivery Condition
    Non sterile - Autoclavable
  • Sterilization Method
    Autoclavable

Usage Protocols

  • Sterilization Procedures
    Autoclaving: at 134°C, 30 min, 2 bar
´