Sartocon Slice 50, Hydrosart®
The Sartocon® Slice 50 is a ready to use 50 cm2 fully disposable crossflow module that is ideally suited for membrane screening and process development, available in a wide variety of MWCO’s and polymers. The Sartocon® Slice 50 can easily be used with the SARTOFLOW® Smart system as well as many other laboratory scale crossflow systems.
- Item No.:
*Custom/bulk order quotes are provided within 72 hours of request.
Hydrosart® high performance membrane is a stabilized cellulose based membrane that has been optimized for biopharmaceutical process applications. Hydrosart® is stable across a broad pH range, is extremely hydrophilic, making it non-protein binding, and virtually non-fouling. Membrane cleaning, storage and depyrogenation can be accomplished by using NaOH even at elevated temperatures and concentrations. These features make Hydrosart® an ideal membrane for biological applications.
Hydrosart® E-Screen ultrafiltration cassettes are available in the following nominal molecular weight cutoffs:
- 2 kD
- 5 kD
- 10 kD
- 30 kD
- 100 kD
- 300 kD
Hydrosart® 30 kD main applications are:
- Removal of contaminants
- Coagulation factors
- Factor VIII
- Factor III
- Monoclonal Antibodies
IndustryPharma / Biotech
Biological ReactivityAll materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
ExtractablesThe total amount of extractables is well below the limits established by the current USP unter "Sterile Water for Injection".
Filtration Area50 cm²
Flow Channel GeometryProtein conc. >20% /or viscosity above.3cp
Cassette FormatSlice 50 Cassettes
Materials of Construction
Integral FramePolypropylene (PP)
Sealing CompoundNot Applicable
Maximum Inlet Pressure3 bar
pH StabilitypH 2 – 14
Non-Fiber ReleasingThis filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Smart & Easy TFF System for Process Development
50 cm2 - 0.14 m² membrane size | 1 L PSU vessel or 150 mL - 1 L single-use Flexboy® bags for recirculation
Intuitive and user-friendly
Highly automated with predefined sequences
The highest product yields
Low shear 4-piston membrane pump